Casing:
•Beautiful appearance, solid structure;
•The frame is made of high-quality galvanized steel plate, which is not easy to deform. Key components shall be insulated with PE.
•The rear return air and the bottom return air can be freely exchanged;
Coil:
•High quality copper tube and double sinusoidal corrugated hydrophilic aluminum fins are closely combined. The collecting head is forged with brass, with uniform water flow distribution and good heat dissipation effect;
•Thick-walled copper pipe extends the service life of the unit;
Condensation pan:
•The condensation pan is formed by stamping with high-grade steel plate, and the surface is treated by hot-dip galvanizing and baking paint; PE insulation covers the surface of the water pan to prevent water leakage and prolong the service time of the drainage pan. The surface cooler and the water pan shall be fixed with screws to ensure the integrity of the water pan and insulation, and eliminate corrosion and cold bridge. The electric valve and other piping ensure the water collecting effect of the condensation pan.
High efficiency motor:
•Permanent low noise capacitor motor, fully enclosed rolling bearing,and the base is equipped with damping pad to reduce the noise, which is fixed by bolts and runs more smoothly.
Centrifugal fan:
•The material is galvanized sheet, high efficiency and low noise multi wing centrifugal impeller, φ 150mm large wheel diameter improves the dynamic balance of the fan.
Accessories (optional):
● Electric heater;
● Air return plenum (below return or back return)
● Removable filter;
● Extended condensation pan;
● Stainless steel condensation pan;
● Ultraviolet sterilization lamp;
Air volume | 340~2380 CMH |
Cooling capacity | 2.42~12.92 kW |
Heating capacity | 3.6~21.73 kW |
Noise level | 20~51 dB(A) |
Casing:
•Beautiful appearance, solid structure;
•The frame is made of high-quality galvanized steel plate, which is not easy to deform. Key components shall be insulated with PE.
•The rear return air and the bottom return air can be freely exchanged;
Coil:
•High quality copper tube and double sinusoidal corrugated hydrophilic aluminum fins are closely combined. The collecting head is forged with brass, with uniform water flow distribution and good heat dissipation effect;
•Thick-walled copper pipe extends the service life of the unit;
Condensation pan:
•The condensation pan is formed by stamping with high-grade steel plate, and the surface is treated by hot-dip galvanizing and baking paint; PE insulation covers the surface of the water pan to prevent water leakage and prolong the service time of the drainage pan. The surface cooler and the water pan shall be fixed with screws to ensure the integrity of the water pan and insulation, and eliminate corrosion and cold bridge. The electric valve and other piping ensure the water collecting effect of the condensation pan.
High efficiency motor:
•Permanent low noise capacitor motor, fully enclosed rolling bearing,and the base is equipped with damping pad to reduce the noise, which is fixed by bolts and runs more smoothly.
Centrifugal fan:
•The material is galvanized sheet, high efficiency and low noise multi wing centrifugal impeller, φ 150mm large wheel diameter improves the dynamic balance of the fan.
Accessories (optional):
● Electric heater;
● Air return plenum (below return or back return)
● Removable filter;
● Extended condensation pan;
● Stainless steel condensation pan;
● Ultraviolet sterilization lamp;
Air volume | 340~2380 CMH |
Cooling capacity | 2.42~12.92 kW |
Heating capacity | 3.6~21.73 kW |
Noise level | 20~51 dB(A) |
1 x PSRHH4802-Y-R 1 x PSRHH4502-Y-R 1 x PSRHH5103 1 x PSRHH5003.C-Y 1 x PSRHH9004.C-Y 3x PSRHH2401M
1 x FOCSWATER4102 3 x FOCSWATER6004C 3 x KMC800LH 3 x PSRHH6003C-R-Y
1 x KMC-1100LY-INV 1 x KMC1100LY 2 x KMC-1100LY-D 1 x CCS0500-INV 2 x CCS0500-INV 2 x FOCSWATER2501
3 x TECS-W4503L-E
2 x ERACS3622E-N-D-B 1 x ERACS3602E-N-B 2 x ERACS3622E-N-B 52 x MFC 900 x FCU