Overall frame structure description The overall support frame and bottom plate of the unit are made of galvanized steel sheet (RAL7045) whose outer surface has been painted, with high strength and strong anti-corrosion ability. The unit is equipped with compressor and refrigeration components as standard protective panels to protect the unit and effectively block noise transmission. The layout of the unit has undergone three-dimensional optimization design, the layout is compact, and the optimized shape ratio requires less maintenance and repair space, which significantly saves space.
Adopt AISI316 stainless steel brazed plate heat exchanger for efficient heat exchange. The surface is covered with closed-cell neoprene insulation material to prevent condensation on the surface of the plate heat exchanger; and the plate heat exchanger is built in to prevent the plate heat exchanger from being frozen under harsh conditions.
The air-side heat exchanger adopts the design of hydrophilic aluminum foil, which improves the drainage capacity of condensed water and improves the heat exchange effect; the copper tube adopts the design of high-efficiency internal thread copper tube to improve the heat exchange effect of the refrigerant.
High efficiency exterior rotor fan from German brand with variable speed controller. It can change fan speed automatically (DVV design) to reduce energy consumption and fan noise.
The unit adopts electronic expansion valve, which has the following characteristics:
Precisely control the refrigerant flow and optimize the heat transfer performance of the evaporator
According to the control and adjustment of the suction superheat of the unit, the performance is more stable
Improve the unit’s deviation from working conditions and low-load operation efficiency
Rapid response, rapid adjustment according to load changes, stable outlet water temperature of the unit
The unit can provide total heat recovery and four-pipe units
Cooling Capacity | 45~332KW |
Heating Capacity | 48~362KW |
Compressor type | Hermetic scroll compressor |
Number of compressors | 2-4 |
Refrigerant | R410a |
Power Input | 380-3Ph-50Hz |
Overall frame structure description The overall support frame and bottom plate of the unit are made of galvanized steel sheet (RAL7045) whose outer surface has been painted, with high strength and strong anti-corrosion ability. The unit is equipped with compressor and refrigeration components as standard protective panels to protect the unit and effectively block noise transmission. The layout of the unit has undergone three-dimensional optimization design, the layout is compact, and the optimized shape ratio requires less maintenance and repair space, which significantly saves space.
Adopt AISI316 stainless steel brazed plate heat exchanger for efficient heat exchange. The surface is covered with closed-cell neoprene insulation material to prevent condensation on the surface of the plate heat exchanger; and the plate heat exchanger is built in to prevent the plate heat exchanger from being frozen under harsh conditions.
The air-side heat exchanger adopts the design of hydrophilic aluminum foil, which improves the drainage capacity of condensed water and improves the heat exchange effect; the copper tube adopts the design of high-efficiency internal thread copper tube to improve the heat exchange effect of the refrigerant.
High efficiency exterior rotor fan from German brand with variable speed controller. It can change fan speed automatically (DVV design) to reduce energy consumption and fan noise.
The unit adopts electronic expansion valve, which has the following characteristics:
Precisely control the refrigerant flow and optimize the heat transfer performance of the evaporator
According to the control and adjustment of the suction superheat of the unit, the performance is more stable
Improve the unit’s deviation from working conditions and low-load operation efficiency
Rapid response, rapid adjustment according to load changes, stable outlet water temperature of the unit
The unit can provide total heat recovery and four-pipe units
Cooling Capacity | 45~332KW |
Heating Capacity | 48~362KW |
Compressor type | Hermetic scroll compressor |
Number of compressors | 2-4 |
Refrigerant | R410a |
Power Input | 380-3Ph-50Hz |
1 x PSRHH4802-Y-R 1 x PSRHH4502-Y-R 1 x PSRHH5103 1 x PSRHH5003.C-Y 1 x PSRHH9004.C-Y 3x PSRHH2401M
1 x FOCSWATER4102 3 x FOCSWATER6004C 3 x KMC800LH 3 x PSRHH6003C-R-Y
1 x KMC-1100LY-INV 1 x KMC1100LY 2 x KMC-1100LY-D 1 x CCS0500-INV 2 x CCS0500-INV 2 x FOCSWATER2501
3 x TECS-W4503L-E
2 x ERACS3622E-N-D-B 1 x ERACS3602E-N-B 2 x ERACS3622E-N-B 52 x MFC 900 x FCU