This unit adopts the fully enclosed scroll compressor of international famous brand, which is efficient, low noise, stable and reliable. And equipped with crankcase heater and perfect control and protection device to ensure the safe operation of the unit. The compressors of the unit are started one by one, the starting current is small, and the unit efficiency is high.
Patented design of the exhaust runner to reduce compressor noise;
The patented design of the transmission components improves the reliability of the compressor;Design of the exhaust runner to reduce compressor noise;
The design of the transmission components improves the reliability of the compressor;
Use PVE lubricating oil to improve the lubrication performance and oil return performance of the compressor;
Shell/inner shell design: The compressor motor adopts suction cooling and does not directly contact with lubricating oil, so the oil circulation rate is low;
Suction airflow design, the lubricating oil is mainly stored in the interlayer of the inner shell, and the suction does not agitate the lubricating oil;
Scroll design makes the unit more stable and more efficient; Unique scroll design makes the unit more stable and more efficient;
The low temperature unit series adopts special low temperature heat pump compressor.
Using AISI316 stainless steel brazed plate heat exchanger, the heat exchange effect is excellent. The surface is covered with closed-cell neoprene insulation material to prevent condensation on the surface of the plate heat exchanger; and the plate heat exchanger is built-in to prevent the plate heat exchanger from being frozen under harsh conditions.
The air-side heat exchanger adopts a hydrophilic design to improve the drainage capacity of condensate water and improve the heat exchange effect; the copper tube adopts a high-efficiency internal thread copper tube design to improve the heat exchange effect of the refrigerant.
The unit adopts electronic expansion valve, which has the following characteristics:
Precise control of refrigerant flow to optimize evaporator heat transfer performance
According to the control and adjustment of the suction superheat of the unit, the performance is more stable
Improve the unit's deviation from working conditions and low-load operation efficiency
Rapid response, rapid adjustment according to load changes, stable outlet water temperature of the unit
Heating Capacity | 30-240KW |
Compressor type | Hermetic scroll compressor |
Number of compressors | 1-4 |
Refrigerant | R410a |
Power Input | 380V-3Ph-50Hz |
This unit adopts the fully enclosed scroll compressor of international famous brand, which is efficient, low noise, stable and reliable. And equipped with crankcase heater and perfect control and protection device to ensure the safe operation of the unit. The compressors of the unit are started one by one, the starting current is small, and the unit efficiency is high.
Patented design of the exhaust runner to reduce compressor noise;
The patented design of the transmission components improves the reliability of the compressor;Design of the exhaust runner to reduce compressor noise;
The design of the transmission components improves the reliability of the compressor;
Use PVE lubricating oil to improve the lubrication performance and oil return performance of the compressor;
Shell/inner shell design: The compressor motor adopts suction cooling and does not directly contact with lubricating oil, so the oil circulation rate is low;
Suction airflow design, the lubricating oil is mainly stored in the interlayer of the inner shell, and the suction does not agitate the lubricating oil;
Scroll design makes the unit more stable and more efficient; Unique scroll design makes the unit more stable and more efficient;
The low temperature unit series adopts special low temperature heat pump compressor.
Using AISI316 stainless steel brazed plate heat exchanger, the heat exchange effect is excellent. The surface is covered with closed-cell neoprene insulation material to prevent condensation on the surface of the plate heat exchanger; and the plate heat exchanger is built-in to prevent the plate heat exchanger from being frozen under harsh conditions.
The air-side heat exchanger adopts a hydrophilic design to improve the drainage capacity of condensate water and improve the heat exchange effect; the copper tube adopts a high-efficiency internal thread copper tube design to improve the heat exchange effect of the refrigerant.
The unit adopts electronic expansion valve, which has the following characteristics:
Precise control of refrigerant flow to optimize evaporator heat transfer performance
According to the control and adjustment of the suction superheat of the unit, the performance is more stable
Improve the unit's deviation from working conditions and low-load operation efficiency
Rapid response, rapid adjustment according to load changes, stable outlet water temperature of the unit
Heating Capacity | 30-240KW |
Compressor type | Hermetic scroll compressor |
Number of compressors | 1-4 |
Refrigerant | R410a |
Power Input | 380V-3Ph-50Hz |
1 x PSRHH4802-Y-R 1 x PSRHH4502-Y-R 1 x PSRHH5103 1 x PSRHH5003.C-Y 1 x PSRHH9004.C-Y 3x PSRHH2401M
1 x FOCSWATER4102 3 x FOCSWATER6004C 3 x KMC800LH 3 x PSRHH6003C-R-Y
1 x KMC-1100LY-INV 1 x KMC1100LY 2 x KMC-1100LY-D 1 x CCS0500-INV 2 x CCS0500-INV 2 x FOCSWATER2501
3 x TECS-W4503L-E
2 x ERACS3622E-N-D-B 1 x ERACS3602E-N-B 2 x ERACS3622E-N-B 52 x MFC 900 x FCU